When to Disinfect Water Pipes at Home - A Comprehensive Guide

Water is one of the most essential elements in our daily lives. From drinking and cooking to bathing and cleaning, we rely on water for numerous purposes. However, it is easy to forget that the water we use flows through a complex system of pipes, which can become contaminated over time. Disinfecting water pipes in your home is crucial for maintaining water quality and safeguarding your health. Thermal and chemical disinfection of water pipes are available. Both methods must be handled with care. This guide will explain how to clean your water pipes.

A nutshell of

• The KAN-therm pipe is thermally disinfected with 70degC hot water.
• Chemical disinfection is the process of filling and flushing a system with a chemical disinfectant. (See table for list of chemicals).

Please contact our technical advisors if you have any concerns or questions about the disinfection of your water system. 

Disinfection the KAN-therm Water Installation

KANtherm systems, except for KANtherm Steel, are suitable for drinking water installations. They also have the required hygiene certificates. The choice of materials for construction does not influence the growth of pathogenic bacteria or the degradation of the properties in drinking water.
It may be necessary to disinfect water pipes as a result:

• Construction defects
• Installation errors
• Non-use of water system for extended periods
• Contamination in tap water

Before disinfection can be performed, it's important to remove the sources of contamination.

Thermal disinfection for water pipes

Thermal disinfection involves heating treated, clean water to a higher temperature.
To ensure that thermal disinfection is carried out effectively, water must be dispensed at 70 degrees Celsius at every point of consumption. This should not take less than three minutes.

It is important to make sure that the operating parameters of the system (maximum temperature permissible as a function operating pressure) are not exceeded.
Ensure the safety of users (minimize burn risk) of the installation.
The installation should only be operated at high temperatures on a periodic basis.

Decontamination of water systems by chemical disinfection

All KAN-therm drinking water systems can be treated with chemical disinfection.
The test is performed at ambient temperatures (not exceeding 25 degrees Celsius) using the reagent doses, and the exposure time prescribed by the compound's manufacturer. It is important to get written confirmation before using any chemical agent that it will not harm the components of your installation. It is not recommended to drink water from the system during chemical disinfection.

How Often Should You Disinfect Your Pipes?

Generally, it’s recommended to disinfect your water pipes every 1-2 years, especially if you notice any signs of contamination. However, if you experience any of the warning signs mentioned earlier, you should disinfect the pipes immediately. Additionally, if you live in an area with hard water, you may need to clean your pipes more frequently to prevent mineral buildup. There are so many hot Water Boiler systems in Dubai who provide these services to make your health good. 

Conclusion

Maintaining the cleanliness and safety of your home’s water supply is essential for your health and well-being. Disinfecting your water pipes is a simple yet effective way to ensure that your water remains free from contaminants, bacteria, and unpleasant odors. By recognizing the signs that indicate it’s time to disinfect your pipes and following the right procedures, you can help ensure that the water you drink, cook with, and bathe in is of the highest quality. Regular maintenance will not only prolong the life of your plumbing system but also give you peace of mind knowing that your water is safe and clean.